Electric Multi Harness

Why do we design this EMH?

The purpose of his item is to separate the power of some high current consumption digital servos from the receiver. It makes to uses Lipo 2-4 cell (3cell recommended) for the receiver power possible, it makes to separate power to supply a receiver and Max of five servos. The safety improves by detaching the receiver from high current consumption servos. Max of 5 servos are able to use 5A 5-6V separately from the receiver. And same time, receiver get power separately to improve the safety.

What does this EMH look like?

 
 

Main specification:

1.      2 systems with multi switching regulator to deliver constant voltage

2.      Input: 7-17V, 2-4cell lipo, 3 cell is recommended.

3.      Output voltage: system A is 5V/6V adjustable, system B is 5V fixed.

4.      Output current: continuous 5A for each system, max 6A 10 seconds, whole system is total 10A constant and 12A max for 10 seconds

5.      Working temperature: 10-35 centigrade.

6.      Size: 35 x 28 x 9mm

7.      Weight: 30gram

Suggest to use lipo meter to check lipo status.

Multi power harness supplies 2 separately system for servos and receiver, one is fixed 5V, one is 5V/6V adjustable,

It supplies total of 10A constant current for big models

When servo load increase suddenly in short time, the voltage drops a lot and this unit will keep it safe from losing control.

Light weight and easy to use.

 

How to use it:

 

Large Glider

Servo

Female plug color

Male plug color

Receiver

Remark

Flap (right)

Yellow

Yellow

Flap (right)

5V in system No. A

Flap (left)

Black

Black

Flap (left)

5V in system No. A

Spoiler (right)

Pink

Pink

Spoiler (right)

5V in system No. A

Spoiler (left)

Blue

Blue

Spoiler (left)

5V in system No. A

Input

Orange

Orange

Input

5V in system No. A

Aileron (right)

To receiver

 

Aileron (right)

5V in system No. B

Aileron (left)

To receiver

 

Aileron (left)

5V in system No. B

Elevator

To receiver

 

Elevator

5V in system No. B

Rudder

To receiver

 

Rudder

5V in system No. B

 

Helicopter, CCPM, choose 6V when need 6V for ccpm servo

Servo

Female plug color

Male plug color

Receiver

Remark

Aileron

yellow

yellow

Aileron

6V in system No. A

Elevator

black

black

Elevator

6V in system No. A

Pitch

Pink

pink

Pitch

6V in system No. A

Rudder

To receiver

 

Rudder

5V in system No. B

Throttle

To receiver

 

Throttle

5V in system No. B

 

Big/Giant model (switch to 5V)

Servo

Female plug color

Male plug color

Receiver

Remark

Aileron (right)

yellow

yellow

Aileron (right)

5V in system No. A

Elevator (1)

black

black

Elevator (1)

5V in system No. A

Rudder (1)

pink

pink

Rudder (1)

5V in system No. A

Flap (right)

blue

blue

Flap (right)

5V in system No. A

Flap (left)

Orange

Orange

Flap (left)

5V in system No. A

Aileron (left)

To receiver

 

Aileron (left)

5V in system No. B

Elevator (2)

To receiver

 

Elevator (2)

5V in system No. B

Rudder(2)

To receiver

 

Rudder(2)

5V in system No. B

Throttle

To receiver

 

Throttle

5V in system No. B

 
Not clearly? Let's go to safe proposal for more information.
             
             

 

43-203,No.1 Yuan Lin Rd., Jida Zhuhai, Guangdong, CHINA. PC: 519015

       

TEL:86-13085807658    FAX: 86-756-3232012

Email: info@ings-cn.com
 
Copyright  by INGS. Co., Ltd. 2012
All Rights Reserved.